SI Fun: Can you Find and Name the 3 Man Made Structures?

Moderators: Triton Mike, Doug Vahrenberg

Post Reply
User avatar
Doug Vahrenberg
Posts: 389
Joined: Wed Mar 02, 2011 2:51 pm
Contact:

SI Fun: Can you Find and Name the 3 Man Made Structures?

Post by Doug Vahrenberg »

Here is a screen capture from my Humminbird in 455kHz and showing 304' of bottom coverage. It shows 3 Different Made Made Structures in the Image. Can you locate and name all 3 Structures made by Humans???

Image
Image

Skeeter, Yamaha, MinnKota, Humminbird, Dobyns, LakeMaster, Transducer Shield & Saver, LuckyCraft, Daiwa, Dave's Custom Baits, OMEGA Tackle, Elite Tungsten, Angler Innovation, Massey Ferguson
User avatar
Doug Vahrenberg
Posts: 389
Joined: Wed Mar 02, 2011 2:51 pm
Contact:

Re: SI Fun: Can you Find and Name the 3 Man Made Structures?

Post by Doug Vahrenberg »

Here it is...

1) Road Bed
2) Fish Hatchery
3) Grits Mill RunWay

And there is some brush.

Image

And I just realize this was with a Humminbird 1st Generation Unit 987c since date was in 2006. THe Second generation technology changed the direction and frequency of the SI Beams and created crisper details in the images.

Here's another image of the Hatchery

Image

Grits Mill from another Angle and 2 Years Later with the 1197c and Gen2 Technology:

Image

Another shot of the Hatchery with Gen2 SI from the 1197c...

Image
Image

Skeeter, Yamaha, MinnKota, Humminbird, Dobyns, LakeMaster, Transducer Shield & Saver, LuckyCraft, Daiwa, Dave's Custom Baits, OMEGA Tackle, Elite Tungsten, Angler Innovation, Massey Ferguson
Post Reply