curado 301 anti reverse bearing

Post Reply
godzilla
Posts: 374
Joined: Tue Aug 31, 2010 1:42 pm

curado 301 anti reverse bearing

Post by godzilla »

i have a curado 301 dsv and i need to replace the roller clutch bearing. i cant find one for the dsv model but only for the "E" series. my question is does the curado E roller clutch bearing fit on the DSV model? hopefully batam1 can hop in to help me out! thanks!
***GODZILLA AFTER MILFS!!...(MOMMAS I LIKE TO FISH)....***
mark poulson
Posts: 10372
Joined: Sun May 08, 2005 4:16 am
Location: Antioch, CA

Re: curado 301 anti reverse bearing

Post by mark poulson »

I think Bantam1 is no longer Shimano's internet spokesman.
Try posting your question here:

http://forums.tackletour.com/viewforum. ... e2529aa39f
Attitude plus effort equal success
CLEAN AND DRY
godzilla
Posts: 374
Joined: Tue Aug 31, 2010 1:42 pm

Re: curado 301 anti reverse bearing

Post by godzilla »

mark poulson wrote:I think Bantam1 is no longer Shimano's internet spokesman.
Try posting your question here:

http://forums.tackletour.com/viewforum. ... e2529aa39f
Thx. Its been a while since I've come here. Sucks that batam1 not here anymore. He was very helpful.
***GODZILLA AFTER MILFS!!...(MOMMAS I LIKE TO FISH)....***
phatbass
Posts: 54
Joined: Fri Dec 27, 2013 2:12 pm
Location: Discovery Bay

Re: curado 301 anti reverse bearing

Post by phatbass »

Silly question. Have you tried ordering direct from shimano of America? I have ordered parts in the past and have received them no problem. One time they even sent me free stuff.
Good luck.
User avatar
FishShimano
Posts: 1
Joined: Tue Nov 24, 2015 5:36 am

Re: curado 301 anti reverse bearing

Post by FishShimano »

Hey Godzilla-
That part is still available through Shimano. It's the same bearing used in the 100DSV. Part # BNT2396 You can order it online here: https://fishshop.shimano.com/vip/produc ... 9372101894 or you can contact Shimano Customer Service at 877-577-0600.
I hope this helps. Thanks for your question.
godzilla
Posts: 374
Joined: Tue Aug 31, 2010 1:42 pm

Re: curado 301 anti reverse bearing

Post by godzilla »

phatbass wrote:Silly question. Have you tried ordering direct from shimano of America? I have ordered parts in the past and have received them no problem. One time they even sent me free stuff.
Good luck.
i already looked on the site but they was out of stock
***GODZILLA AFTER MILFS!!...(MOMMAS I LIKE TO FISH)....***
godzilla
Posts: 374
Joined: Tue Aug 31, 2010 1:42 pm

Re: curado 301 anti reverse bearing

Post by godzilla »

FishShimano wrote:Hey Godzilla-
That part is still available through Shimano. It's the same bearing used in the 100DSV. Part # BNT2396 You can order it online here: https://fishshop.shimano.com/vip/produc ... 9372101894 or you can contact Shimano Customer Service at 877-577-0600.
I hope this helps. Thanks for your question.
ordered..thx
***GODZILLA AFTER MILFS!!...(MOMMAS I LIKE TO FISH)....***
Jalseng
Posts: 8
Joined: Tue Feb 16, 2016 1:53 pm

Re: curado 301 anti reverse bearing

Post by Jalseng »

Sell me that 301 dsv lol
Post Reply