The Sanshouo Rig with Bobby Barrack | Punch Hook Sale VIDEO

Post Reply
WB Staff
Posts: 12504
Joined: Thu Jan 26, 2012 10:56 am

The Sanshouo Rig with Bobby Barrack | Punch Hook Sale VIDEO

Post by WB Staff »

The Sanshouo Rig with Bobby Barrack



Bobby Barrack from Sugar Barge (his home away from home - now that he moved to Texas) on the Sanshouo Rig with the only punch hook he uses by Mustad, which are on sale May 11 and 12 at Fisherman's Warehouse
Ranger519v
Posts: 51
Joined: Wed Jun 01, 2016 9:17 am

Re: The Sanshouo Rig with Bobby Barrack | Punch Hook Sale VIDEO

Post by Ranger519v »

Nice commercial and someone can correct me if I'm wrong but I don't believe this Mustad hook has a completely welded eye? I know it has a vinyl coating around the eye but unless it is fully welded, the vinyl coating will eventually give way and then your braid will be cut by the incomplete weld.
Bob
===========================================
1997 Ranger 519DVS, 225 Mercury EFI, 12 and 9" HDS Gen 3s, 109 MG Tour, 10' Talons
===========================================
kmah
Posts: 453
Joined: Thu Mar 12, 2009 2:01 pm

Re: The Sanshouo Rig with Bobby Barrack | Punch Hook Sale VIDEO

Post by kmah »

Bobby your a crack up. I'm rolling :lol: :lol: :lol: :lol:
WB Staff
Posts: 12504
Joined: Thu Jan 26, 2012 10:56 am

Re: The Sanshouo Rig with Bobby Barrack | Punch Hook Sale VIDEO

Post by WB Staff »

@Ranger519 Bobby checked in with this answer to your post.

I've been using this hook for just about four years now. I've punched literally HUNDREDS of bass in the range of five to 11.5 pounds and never had any issues at all. I've covered more miles than most (punchin' with these) so if I don't have a problem with them, I wouldn't think there would be any.
Post Reply