2005 Stratos 201Proxl for sale

oscarrocks75 · Post by **oscarrocks75** » Thu Apr 23, 2020 1:11 pm

2005 Stratos 201ProXL with 2007 Yamaha HPDI 2 stroke(approx 380 hours).
Minkota 112lb fortrex, padded front deck, carpet replaced within 2 years, new seat upholstery, Bobs manual jackplate,
Yamaha 27M prop, Lowrance 9in gen3 touch at bow, Lowrance 12in gen2 touch at console, point 1 antenna, structure scan. Graphs are linked.
This boat is fast, safe in big water, tournament rigged and fishes very comfortably.
Boat has some gel coat cracking on gunnels.
I've had some inquiries regarding the motor---Motor was evaluated by a Yamaha certified mechanic on 5/3/20.
Motor with 377 hours, All cylinders running at 130PSI during compression check, no alarms or codes when run on computer. Motor is in excellent working order.
Asking 16,500.00,

Jarrod 408 623-0631

Steve Ericksen · Post by **Steve Ericksen** » Mon May 04, 2020 8:33 am

Beautiful rig, someone will get a smokin deal!

Upcountry · Post by **Upcountry** » Mon May 04, 2020 5:37 pm

Very clean boat!!!!! Horse Power?

oscarrocks75 · Post by **oscarrocks75** » Tue May 05, 2020 2:07 pm

HP is 250!!

sacslim · Post by **sacslim** » Tue May 05, 2020 2:42 pm

where is the boat located?

TD · Post by TD » Tue May 05, 2020 5:15 pm

Is the 250 HPDI a series 1 or series 2 ?
Were the tiny fuel filters on the top of the motor ever replaced? Service on these filters is about $1500.00
Was the oil filter system replaced as per the recall?
Has this motor been looked at by a dealer? and what did they say?
Beautiful boat however the 250 HPDI has been riddled with problems and I just want to make sure there are no issues..
The re-build is $4000.00
Beautiful boat!

oscarrocks75 · Post by **oscarrocks75** » Wed May 06, 2020 5:53 pm

TD,
The original motor on this boat was a 2005. The entire motor was replaced in 2007. Per Bobs Marine in Modesto(5/6/20) where I purchased the boat and the old motor was replaced, the serial number on this motor has no recalls or alerts associated with it. In other words all the required replacement parts came on the new motor when it was sent to Bobs from Japan. If this was a "series 1", the motor would be alerting for a recall of parts. The decals for the "series 2"(the same motor with these updated parts), came out after this motor was placed on the boat. This motor has had numerous services with no recalls required. The last was less than 12 operating hours ago. This motor also just completed a compression check last week with 130psi in all cylinders with no issues. Hope this helps out. Call or text if you want more details. Thanks for your interest!

Jarrod