Ultrex shaft slips througout the day
Moderator: Ken Sauret
Ultrex shaft slips througout the day
Anyone else have an issue with their Ultrex shaft sliding down during the day? The collar is tight as can be. Any solutions?
-
- Posts: 8
- Joined: Wed Nov 18, 2020 3:52 pm
Re: Ultrex shaft slips througout the day
what is your phone number i will text you a picture of what i did. very simple and works
Re: Ultrex shaft slips througout the day
I have the same issue. What is the fix?
Jeff Jue
Skeeter Boats
Bob's Machine Shop
Powell Rods
Perigrine 250
California Reservoir Lures
Amphibia Eye Wear
Skeeter Boats
Bob's Machine Shop
Powell Rods
Perigrine 250
California Reservoir Lures
Amphibia Eye Wear
Re: Ultrex shaft slips througout the day
I have the same issue. I just thought it was because I have the 60 inch shaft. It also prevents it from locking back when it's fully extended.
-
- Posts: 8
- Joined: Wed Nov 18, 2020 3:52 pm
Re: Ultrex shaft slips througout the day
Hope this makes sense without a picture. In the space between your trolling motor head and collar put a piece of garbage disposal hose held in place by a stainless clamp. Cut piece to fit perfectly and then slice hose down the side. Install hose over shaft and tighten clamp or clamps down. Motor will not move. I have had this on my trolling motor for 6 months. If you want a picture of mine let me know.
Re: Ultrex shaft slips througout the day
That cool thanks. Do you have pic you can post?
Jeff Jue
Skeeter Boats
Bob's Machine Shop
Powell Rods
Perigrine 250
California Reservoir Lures
Amphibia Eye Wear
Skeeter Boats
Bob's Machine Shop
Powell Rods
Perigrine 250
California Reservoir Lures
Amphibia Eye Wear
-
- Posts: 8
- Joined: Wed Nov 18, 2020 3:52 pm
Re: Ultrex shaft slips througout the day
sorry man i dont know how to do all
that technical stuff
that technical stuff
Re: Ultrex shaft slips througout the day
I believe TH Marine has an upgraded version that I bought that works great. Easily adjusts when you need to in shallow water or deep water with big waves.
Re: Ultrex shaft slips througout the day
Sorry it’s from Bobs machine shop
Copyright © 2013-2024 WesternBass.com ®