Travis Moran is going to be breaking down tube fishing with Mizmo Baits 4" tubes. Tubes have been around forever but they're often overlooked. These baits are incredibly versatile and can match a ton of the baitfish that bass are often preying on.
Bobby Barrack breaks down the OB Minnow wake bait by Optimum Baits. Bobby is on the California Delta and catching them good.
How-To Build a Fishing Rod: Chapter 6 - Wrapping Hook Keeper and Decal with Batson Enterprises
Buzzbaits for summer and fall. We're going to be targeting those shallow water active bass in the early morning and late evening. We'll be showing you how to get the most out of Buzzbait fishing.
Big Bass catching secrets revealed with the new River2Sea Square Bill Crank baits. What size rod, What size line and other important tips is what Scott Martin will show you in this "How to fishing Video"! Square Bill crankbaits are a very versatile fish catching crank bait and technique ....learn the pro tips to make you better.
Lucky Tackle Box breaks down the location, retrieval and rigging for fall fishing with a crankbait.
Ken Mah talks about saving money by refurbishing tungsten weights in a step-by-step "Tackle How-To"
Dobyns Rod pro Tom Redington shows you how to make a roll cast with a fishing reel and fishing rod. The roll cast is used by fishermen to accurately place lures close to fishing targets from a long distance without a big splash that spooks fish. Follow Tom's tips to quickly learn how to master the roll cast to catch more bass.
www.seaguar.com -- Seaguar pro-staffer Shaw Grigsby, Host of One More Cast uses Smackdown 8-strand braid to demonstrate how to tie the Double Uni knot.
Rigging How-To: a bad bubba shad presented by Dan's Delta Outdoors.
How to fish a wake bait using the Optimum Baits OB Minnow Top Water Bait. Bobby Barrack breaks down the OB Minnow wake bait by Optimum Baits. Bobby is on the California Delta and catching them good.
How to wrap guides on a fishing rod when rod building.
How to fish a magnum shaky head- Ott Defoe, Bassmaster Elite Series Pro, explains how to fish magnum shay head jigs. Find the fishing rods used in this video at http://www.fenwickfishing.com/Fenwick.... FEEL THE ACTION!
Tips and tricks to help you spool correctly and get the best performance and longest life out of your braid.
Matt Allen of http://www.tacticalbassin.com shows two tricks that will help you get backlashes out immediately. No more picking for hours, just follow these steps and your birds nest is gone!
Looking for a Topwater Lure that will smoke the bass, cast great and give you and advantage on your fishing partners - try the Ima Skimmer Grande. Roumbanis talks retrieves, action and modifications.
Berkley pro Mike Iaconelli asks... Are you aggravated by spinning reel line twists constantly knotting up around your rod tip, reel parts, or balling up when you cast? Birds nests or knotting can be a real nuisance when fishing spinning reels, but getting off to a good start with proper technique of putting the line on the reel can reduce these frustrations considerably.
Tube Fishing for Smallmouth Bass with Elite Pro Seth Feider
How-To Build a Fishing Rod: Chapter 4 - Measuring and Placing the Guides
Effective hook-tying keeps you from missing fish when you Texas-rig the Flappin' Hog for punching mats and grass
The Arbor Knot is used for tying line to the reel and can be used for both baitcast or spinning reels. This knot is suggested for monofilament and fluorocarbon lines.
Berkley Pro Josh Bertrand shares a rigging tip for anglers looking to catch big bass in heavy cover that are in deep, clear water.
Full materials list and step-by-step demonstration of setting the handle. Part 3 in the Batson Enterprises How-To build a fishing rod series.
Seaguar pro-staffer and Elite Series Angler Andy Montgomery talks about how he uses Seaguar® Tatsu™ double-structure fluorocarbon as a leader tied to Kanzen® braid. Watch as Andy shows how to tie the Modified Albright Knot he uses to connect the leader to the mainline.
Fred Roumbanis explains how the Beast Hunter is different and how he fishes it (line, retrieve technique)
After your new Lowrance HDS unit is installed, it is ready to be configured for first-time use. In this video, watch as Lowrance Product Expert Jacob Scott demonstrates how to set up a new HDS unit.
How to Spine a blank when building a fishing rod.
Ron Colby discusses how careful rigging can help avoid line twist when using the Yamamoto D-Shad. He demonstrates rigging with the Owner Twist-Lock hook.
Rod Building Series with Batson Enterprises - Chapter 1 - What you need to build a fishing rod
Join Fox Sports Outdoors host Barry Stokes as he demonstrates how easy it is to automatically return to a waypoint using a Lowrance HDS Gen3 unit and a MotorGuide Xi5 trolling motor.
A Kayak Fishing Tales Exclusive! Patrick Sebile, the owner and designer of Sebile Lures shows Jim Sammons (and you!) how to rig his amazing A.T. Worm so it will walk the dog. Jim takes it out for a test drive and hooks up!
Commissioning a Lowrance outboard autopilot is quick and easy. Watch as Lowrance Product Expert Jacob Scott commissions a Lowrance Outboard Autopilot using a HDS Gen3 multifunction display.
Matt Allen of http://www.tacticalbassin.com discusses how to change the presentation of your walking top water baits by using a Front Runner. To read the whole article visit http://www.tacticalbassin.com/ To support Tacticalbassin do your shopping at http://www.tacklewarehouse.com/
In this "How to Series" learn to catch bigger bass on Kentucky Lake in the summer time. During this instructional video FLW Champion Scott Martin explains a simple approach to bass fishing deep on the ledges and shallow in the grass. Scott will also explain the right rod, reel and line up for each technique so you will be more successful. Deep Diving crankbaits and the River2Sea topwater Rovers are the stars of this ShortCast.
Matt Allen of http://www.tacticalbassin.com shows how to modify your swimbaits and swimbait harnesses to last longer. Catch more fish and save money with these easy steps.
FLW World Champion bass fisherman Scott Martin discloses the secrets of how to use the lethal weapon from River2sea, S-Waver, the hottest swimbait in the West Coast which imitates the most natural dying action.
Watch as Lowrance Product Expert Jacob Scott shows you how to remove your Lowrance Elite Unit from the Quick-Release Bracket
Matt Allen of http://www.tacticalbassin.com discusses how to fish a popper for big bass during the summer months.
Fishing a deep wacky rig, also known as a Neko Rig with a nail weighted plastic.
The Improved Clinch knot is one of the most widely used fishing knots. It provides a good method of securing a fishing line to a hook, lure, or swivel. The "improved" version shown here includes an extra tuck under the final turn. It is commonly used to fasten the leader to the fly. Because it is harder to tie in heavier lines it is not recommended if you are using over 30 lb test line.
Boom Boom Fred Roumbanis explains how he caught them at Kentucky Lake with Optimum's Victory Tail.
Edwin Evers talks about choosing lure colors by using the three things that bass eat 90% of the time.
Pro Angler, Host of Facts of Fishing THE SHOW and Bassmaster Emcee Dave Mercer loads us up with tips for targeting summertime topwater largies!
Mike Iaconelli designed this Berkley Havoc bait. "Speed worms and cut tails have been go-to lures forever since Bass key in on the tail action." The Subwoofer's revolutionary design increases hook-ups allow you to Catch More Fish. Check out the bait on our Berkley site.
Bassmaster Elite Series pro Edwin Evers give a quick tip on matching hook size to line size.
Wonder why you can’t see your boat icon on the Lowrance HDS chart screen? In this video, watch as Lowrance Product Expert Jacob Scott shows how to resolve this issue with one simple step.
Bassmaster Elite Series pro Fletcher Shryock gives tips on fishing the Gary Yamamoto Custom Baits Heart Tail Swimbait
Bub Tosh with another way to rig the Yamamoto Cali Roll for a finesse presentation.
Lowrance Colorline controls how bottom hardness will be shown on the screen. Watch as Lowrance Product Expert Jacob Scott adjusts the Colorline setting on an HDS Gen3 multifunction display.
Bassmaster Elite Series pro Fletcher Shryock shows off the new Gary Yamamoto Custom Baits Midasu lipless crankbait, offering tips on its presentation and how and why to vary retrieves.
Bub Tosh rigging tips for the new Gary Yamamoto Custom Baits California Roll. A new spade tail worm, with a uniquely-shaped tail.
Want to use an iPad to control your HDS Gen3? Watch Lowrance Product Expert Jacob Scott configure a connection between an iPad and a HDS Gen3.
The Trilene Knot, also known as the Two Turn Clinch Knot is great for tying line to snaps, swivels, hooks and lures
Looking for information on switching the active panel in a multi-panel display? Watch as Lowrance Product Expert Jacob Scott demonstrates how to switch active panels on Elite CHIRP and Elite HDI units.
How to tie a good knot is key to being successful as an angler. The Palomar knot is best for monofilament and superlines. Remember to wet the knot before pulling tight. Berkley, Catch More Fish!
Bassmaster Elite Series pro Keith Combs is thinking about what the bass see when they are feeding up - a topwater tip for line.
Matt Allen of http://www.tacticalbassin.com explains how to catch more bass by walking a frog instead of popping or hopping it.
KVD talks about why, when and how he changes a treble hook. He talks about Mustad hooks and the size he uses.
Lowrance just released a new software update for the HDS Gen2 Touch units. Join Product Manager Jeremiah Clark as he walks through the main differences between the old and new software systems.
The Berkley braid knot is a good choice for tying braided lines to hooks, lures and leaders. It was developed in the Berkley lab to retain good knot strength and stops braided lines from slipping out of the knot.
Advertising
