The red one vs g force trolling motor cables
The red one vs g force trolling motor cables
Which one is better, g force is 1/3 of the price and like the handle better. I need one for my fourtrex.
-
- Posts: 53
- Joined: Wed Jan 25, 2012 9:27 pm
Re: The red one vs g force trolling motor cables
I've had the G force handle on my Minn Kota for the last 8 months and only have good things to say about it.No problems with it at all.
The only thing I see happening in the future is the plastic handle getting accidently stepped on and broken or it getting brittle from the sun over time and cracking.
I know the Red One has a aluminum handle...
I went with the G Force because of the price.
The only thing I see happening in the future is the plastic handle getting accidently stepped on and broken or it getting brittle from the sun over time and cracking.
I know the Red One has a aluminum handle...
I went with the G Force because of the price.
-
- Posts: 369
- Joined: Thu Apr 24, 2008 12:59 pm
- Location: Roseville, CA
Re: The red one vs g force trolling motor cables
I would get the G force. The red one is a total rip off.
There was a thread on BBC about whats needed to make your own trolling motor cable system. Looked pretty easy and cheap.
I would prefer a plastic or rubber handle so it does not damage my boat. I know you can tie the handle down but that won't always happen.
There was a thread on BBC about whats needed to make your own trolling motor cable system. Looked pretty easy and cheap.
I would prefer a plastic or rubber handle so it does not damage my boat. I know you can tie the handle down but that won't always happen.
Re: The red one vs g force trolling motor cables
+1Mike wrote:Or make your own for $5
Re: The red one vs g force trolling motor cables
I went to Lowes and got everything including the exact same handle the G-Force has for $15. 3 feet of cable 80 cents a foot, 2 crimps for ends $1.50, handle in the lawn mower department $10.
Re: The red one vs g force trolling motor cables
I have both. G-Force on my Tracker and The Red One on my Ranger. G-Force handle broke and decal fell off first day. Cable also kinks to EZ. Red One is waaaaaaayy better! Zebco or Daiwa? If you can afford Daiwa (The Red One), buy it.
RANGER Boats - MERCURY Marine
-
- Posts: 680
- Joined: Wed May 16, 2007 7:42 pm
- Location: Lake Casitas/ Havasu/ Clearlake
Re: The red one vs g force trolling motor cables
The rip cord by Viking Lures! way easier to install, 19.99 retail and tested for way too long. Tacklewarehouse will have them up in a few days. If you want to save your money.
"Posse Approved"
www.reactorwatch.com
www.bassaholics.com
www.irodfishing.com
www.reactorwatch.com
www.bassaholics.com
www.irodfishing.com
- scottsweet
- Posts: 995
- Joined: Mon Aug 22, 2005 11:52 pm
- Location: Campbell, CA
Re: The red one vs g force trolling motor cables
The Red One has either an aluminum handle or a nylon handle. I have the nylon handle to avoid damage to the boat, etc.
I have had it for some time on my Fortrex and like it very much.
I have had it for some time on my Fortrex and like it very much.
Scott Sweet
www.teamccmarine.com
www.rangerboats.com
www.humminbird.com
www.minnkotamotors.com
www.lews.com
www.phenixrods.com
www.odysseybattery.com
www.simmsfishing.com
www.peregrine250.com
www.teamccmarine.com
www.rangerboats.com
www.humminbird.com
www.minnkotamotors.com
www.lews.com
www.phenixrods.com
www.odysseybattery.com
www.simmsfishing.com
www.peregrine250.com
Re: The red one vs g force trolling motor cables
Check this one Out I have them just view to see how easy install is...
http://fishinthecaliforniadelta.blogspot.com/
http://fishinthecaliforniadelta.blogspot.com/
Dan Mathisen
dan_mathisen@att.net
209-612-5028
Ben Green Insurance
dan_mathisen@att.net
209-612-5028
Ben Green Insurance
Re: The red one vs g force trolling motor cables
Thanks for all the advise and responses, kind of a mixed bag of opinions and I'm sure each product has their pros and cons. I think the red one comes with more goodies and might be a higher end product and should be for that price, but a nylon coated cable is just that, can't imagine much difference there. I'd love to have the opportunity to see them first hand but I live a long ways away from anyone that would have two, let alone all three.
I think I'll hold off until I can get some more info on the rip cord from Viking, but I think at this point I'm leaning towards the g force. I'll let you guys know what I end up doing and how I like it.
Thanks for all the help.
I think I'll hold off until I can get some more info on the rip cord from Viking, but I think at this point I'm leaning towards the g force. I'll let you guys know what I end up doing and how I like it.
Thanks for all the help.
- Kelly Ripa
- Posts: 2235
- Joined: Sun May 08, 2005 6:39 am
- Location: Ojai
Re: The red one vs g force trolling motor cables
Red One
LET'S GO BRANDON
Remember ...What the Dormouse said...Feed your head!
Remember ...What the Dormouse said...Feed your head!
Re: The red one vs g force trolling motor cables
BINGO! Way to go for sure!littlebailey wrote:The rip cord by Viking Lures! way easier to install, 19.99 retail and tested for way too long. Tacklewarehouse will have them up in a few days. If you want to save your money.
Eric Elshere
https://donssmokinsalmon.com
https://maxima-lines.com
https://donssmokinsalmon.com
https://maxima-lines.com
Re: The red one vs g force trolling motor cables
I'm all in for the "RED ONE" I have torture tested mine for 2 years and it is still holding up! There's a reason all the others are imitating the Red One, because it's the best.
Greg Gutierrez
Frenzy Baits
Frenzy Baits
Re: The red one vs g force trolling motor cables
Actually, G force was out before the Red one. Matter of fact Razza had a version before the red one.Double-G wrote:I'm all in for the "RED ONE" I have torture tested mine for 2 years and it is still holding up! There's a reason all the others are imitating the Red One, because it's the best.
http://www.amazon.com/T-H-GFH-1R-DP-G-F ... otor+cable
Re: The red one vs g force trolling motor cables
Ron T. wrote:red one
Posted June 2013. less than a year later update. two weeks ago the cable broke at handle. Made do by putting cable threw the end of handle and locking it in with the piece that came off the end of cable. this week the cable is ready to give at the other end. frayed big time. not another day left on it. Not sure what the answere is to this pull cord problem. Seems its just one of those things we need to deal with .
Re: The red one vs g force trolling motor cables
Hey guys, I ended up getting the g force and a year later no problems at all
- Kelly Ripa
- Posts: 2235
- Joined: Sun May 08, 2005 6:39 am
- Location: Ojai
Re: The red one vs g force trolling motor cables
Had mine for the same time period as Ron and still good to go. Red One...I have an aluminum handle.
LET'S GO BRANDON
Remember ...What the Dormouse said...Feed your head!
Remember ...What the Dormouse said...Feed your head!
-
- Posts: 369
- Joined: Thu Apr 24, 2008 12:59 pm
- Location: Roseville, CA
Re: The red one vs g force trolling motor cables
My Minn Kota handle still works.....if it breaks I have a spare that I bought for $10 at tackle warehouse.
-
- Posts: 41
- Joined: Tue May 01, 2012 5:33 pm
Re: The red one vs g force trolling motor cables
Hi guys
Just a quick note that you only need to return your Red One system anytime for a no question replacement. In all fairness make sure you are using my stainless sleeve and pin cover on all Minn Kotas, if not that area is going to wear out, and you can actually saw a slice in the top of your motor from a system where my sleeve is not used . It's real easy to see if your system is failing there. I've tried really hard to help end the dreaded cord snap. Everything in those Red One systems is very costly and I always use the best materials I can find. This gets passed along to you guys. A perfect system? Maybe not....yet. I stand behind all my products and will take care of any issues which thankfully have been very minimal.
Thanks, Danny Miller
Just a quick note that you only need to return your Red One system anytime for a no question replacement. In all fairness make sure you are using my stainless sleeve and pin cover on all Minn Kotas, if not that area is going to wear out, and you can actually saw a slice in the top of your motor from a system where my sleeve is not used . It's real easy to see if your system is failing there. I've tried really hard to help end the dreaded cord snap. Everything in those Red One systems is very costly and I always use the best materials I can find. This gets passed along to you guys. A perfect system? Maybe not....yet. I stand behind all my products and will take care of any issues which thankfully have been very minimal.
Thanks, Danny Miller
-
- Posts: 36
- Joined: Mon May 16, 2005 9:35 am
- Location: Redding, CA
- Contact:
Re: The red one vs g force trolling motor cables
I got a new Fortex 101 a few months back and had the Red One installed and I'm loving it. No more tangled ropes in my reel handles, or hooks in my rope. After over 30 years tournament fishing I would not have thought something so simple would make fishing so much more enjoyable. All this for less than the cost of a good fishing rod ! Get the RED ONE you will not be sorry.
Howard Hughes
Howard Hughes
Re: The red one vs g force trolling motor cables
I've had the RED One since Danny first introduced them, installed one on each of my MG Tour motors and the difference they made in pulling my motor out of the mount was excellent and still functioning today. I've now installed one on the Minkota that's on the Pheonix, flawless operation since and never have to worry about breakage. The cable that he uses, is not just any coated cable, but in fact the same cable used in the pully systems on aircraft. Is it expensive, yes it is and you are paying for the absolute best quality parts you can possibly get as well as a thoroughly well thought out design and full cable system to match your motor.
I don't know any thing about G-Force or The Rip Cord, yet because the Red One is designed by Danny Miller, I know I'm getting the best in both product and service, and would not think twice about installing any other system. I know I got the Mercedes of TM cables.
I don't know any thing about G-Force or The Rip Cord, yet because the Red One is designed by Danny Miller, I know I'm getting the best in both product and service, and would not think twice about installing any other system. I know I got the Mercedes of TM cables.
-
- Posts: 611
- Joined: Mon Aug 06, 2007 8:01 pm
- Location: Gun Barrel City TX
Re: The red one vs g force trolling motor cables
I know this thread is over a year old, but that's the beauty of the "search" button on this forum!! I broke the latch release/lift rope on my MinnKota Edge this weekend. Was lucky there was enough of the end sticking outta the guide where I could get some pliers on it to release the down lock, but I can't go thru that for a whole day again!! Does anyone have the web site for the three cables mentioned in this thread? (Red One, G Force, Rip Cord) Thanks in advance
Jim C.
"Rip Some Lips!!!!"
"Rip Some Lips!!!!"
Re: The red one vs g force trolling motor cables
broke the plastic handle on my G-Force(cheap plastic), I wonder if T-H Marine would replace it ? any one tried yet ?.....
-
- Posts: 611
- Joined: Mon Aug 06, 2007 8:01 pm
- Location: Gun Barrel City TX
Re: The red one vs g force trolling motor cables
I ended up getting mine from tackle warehouse, install was super easy and it is still working great
http://www.tacklewarehouse.com/G-Force_ ... FORCE.html
http://www.thmarine.com/products/Trolli ... fgodJlUACw
http://www.tacklewarehouse.com/G-Force_ ... FORCE.html
http://www.thmarine.com/products/Trolli ... fgodJlUACw
Re: The red one vs g force trolling motor cables
TW won't sell just the handle !, waiting for TH Marine to get back to me !....
Re: The red one vs g force trolling motor cables
TH marine never returned my email & voicemail !.... I found the exact same handle at Amazon for 8$ !
-
- Posts: 1163
- Joined: Wed May 11, 2005 5:18 am
Re: The red one vs g force trolling motor cables
Red One
We carry them at the Hook Line & Sinker
We carry them at the Hook Line & Sinker
-
- Posts: 611
- Joined: Mon Aug 06, 2007 8:01 pm
- Location: Gun Barrel City TX
Re: The red one vs g force trolling motor cables
Gene, will the Red One work on a Minn Kota Edge? The only ones listed on their website are the Maxxum and FortrexGene Buchholz wrote:Red One
We carry them at the Hook Line & Sinker
Jim C.
"Rip Some Lips!!!!"
"Rip Some Lips!!!!"
-
- Posts: 53
- Joined: Wed Jan 25, 2012 9:27 pm
Re: The red one vs g force trolling motor cables
I recently contacted TH Marine regarding my handle cracking at the base where the cable goes thru.
They asked for my address and 4 days later, I received a whole new G-Force Handle Set for free.TH Marine backs their products and were very helpful.I highly recommend TH Marine
They asked for my address and 4 days later, I received a whole new G-Force Handle Set for free.TH Marine backs their products and were very helpful.I highly recommend TH Marine
-
- Posts: 41
- Joined: Tue May 01, 2012 5:33 pm
Re: The red one vs g force trolling motor cables
That's how customer service should be Martin. I get a lot of feed back and sometimes the question does come up about why I don't make a cheap version. It does arouse my curiosity. I am in the process of helping to redesign that particular handle with the company that owns the patent on it as it does have issues. They are asking I use it in a new system. There are cheaper versions out there but a lot of negativity comes from purchasers and i'm really thin skinned so making a cheap bullet proof system........not sure about that...yet.
Thanks Danny
Thanks Danny
-
- Posts: 10387
- Joined: Sun May 08, 2005 4:16 am
- Location: Antioch, CA
Re: The red one vs g force trolling motor cables
How about an old fashioned wood dowel handle?
Attitude plus effort equal success
CLEAN AND DRY
CLEAN AND DRY
Re: The red one vs g force trolling motor cables
T&H finally got back to me" sending me the whole kit ! free of charge !. the apologized for not returning my call earlier !....Cool!...
-
- Posts: 611
- Joined: Mon Aug 06, 2007 8:01 pm
- Location: Gun Barrel City TX
Re: The red one vs g force trolling motor cables
So it all comes down to a question I asked earlier...will the Red One work on a Minn Kota Edge? Danny? Gene? Anyone???
Jim C.
"Rip Some Lips!!!!"
"Rip Some Lips!!!!"
-
- Posts: 41
- Joined: Tue May 01, 2012 5:33 pm
Re: The red one vs g force trolling motor cables
Some of the smaller trolling motors my system will not fit. If your in Folsom or Sac town I could come by verify, and do an install for you.Stratos278 wrote:So it all comes down to a question I asked earlier...will the Red One work on a Minn Kota Edge? Danny? Gene? Anyone???
Danny
- fishercurtis
- Posts: 265
- Joined: Wed Feb 15, 2006 5:34 pm
- Location: Alamo, Ca
- Contact:
Re: The red one vs g force trolling motor cables
All I can say Is I really liked the g-force until yesterday when I was on the delta in 30+ mph winds and went to pull up the trolling motor to have the handle snap off in my hand. That wasn't fun trying to get the motor up while getting blown out.
It's All About the Hook up
Esin Restaurant & Bar, Revel Kitchen & Bar
Esin Restaurant & Bar, Revel Kitchen & Bar
-
- Posts: 41
- Joined: Tue May 01, 2012 5:33 pm
Re: The red one vs g force trolling motor cables
Sorry to hear that Curtis. Those types of mishaps hardly ever happen in calm situations, at least none of mine anyway, and I've had my share. The new design I sent them will end that if they decide to go with it.fishercurtis wrote:All I can say Is I really liked the g-force until yesterday when I was on the delta in 30+ mph winds and went to pull up the trolling motor to have the handle snap off in my hand. That wasn't fun trying to get the motor up while getting blown out.
Danny
-
- Posts: 1163
- Joined: Wed May 11, 2005 5:18 am
Re: The red one vs g force trolling motor cables
Sorry Stratos I haven't been on line for a couple of days. What Danny Miller said
Re: The red one vs g force trolling motor cables
So I put a fortrex on my boat. Also installed The Red One SS cable. Easy install, but found the cord was a bit long for me as I'm not tall. Sat 530pm randomly called Danny Miller to ask about cutting and putting new crimp on.....he actually answered (it's his cell#on his site) and he said I'll custom cut you a new one and send it out. Texted me today and said it's sent. That's customer service! And finished it off with reinforcing his lifetime warranty. Worth the extra money to me. Thanks Danny!
Re: The red one vs g force trolling motor cables
Danny Miller is that guy, Go with his product and you will not be disappointed!!! It is nice when someone actually researches a product and puts out quality not cheap quantity, congrats Danny, look forward to seeing you again in the future..
Jason Bubier
Director
NorCal90 Fishing Events
530-230-8868 cell
530-589-2601 home
ajbubier@sbcglobal.net
Director
NorCal90 Fishing Events
530-230-8868 cell
530-589-2601 home
ajbubier@sbcglobal.net
Re: The red one vs g force trolling motor cables
T-H Marine is a strong and long standing company with lots of great products google them they are the real thing much more than pull cords- cables
the best way to catch a big one is don't lose um sharp hooks set drag retie!
Re: The red one vs g force trolling motor cables
Minn Kota also is making a cable too.
its on their website.
Installed in five minutes.
I've had mine a while, so far so good and half the price of red.
its on their website.
Installed in five minutes.
I've had mine a while, so far so good and half the price of red.
- Ray Vanacore
- Posts: 513
- Joined: Sat May 07, 2005 12:24 pm
- Location: Folsom,Ca
Re: The red one vs g force trolling motor cables
On a Minn kota you can put all the different cables and ropes you want but it don't fix the problem, Danny has solved that problem to and extent by replacing the bushing with a stainless steel chamfered and polished on both ends to eliminate the chafing of the cables and rope . Minn Kota is aware of the problem as Danny has talked to them about it.
Ray Vanacore
Re: The red one vs g force trolling motor cables
Polish the existing hole on the minn kota, its not that hard.
Also a shot of silicone spray does wonders no matter which cable you have.
Also a shot of silicone spray does wonders no matter which cable you have.
- Otay Michael
- Posts: 1419
- Joined: Fri Oct 21, 2005 10:27 am
- Location: Del Mar, California
- Contact:
Re: The red one vs g force trolling motor cables
MY THMarine one just busted while fishing 50 mph winds at El Cap today, bummer. After searching and reading all this, went for the Viking Marine Ripcord. It's more now, what, 7 years later- some $24 thru Tackle Warehouse. You almost go overboard when they break 1/2 way up, glad I didn't.
Otay Michael
All I need to get into the money would be the four I usually get along with a 20# kicker.
Own no boring art: www.seewald.com
Name written in the book of life.
All I need to get into the money would be the four I usually get along with a 20# kicker.
Own no boring art: www.seewald.com
Name written in the book of life.
Copyright © 2013-2024 WesternBass.com ®