Bass Fishing Forum - Westernbass.com

Pepsi man

I would disconnect the ethernet cable at the bow unit and then do a hard reset. This fixes most config issues and is also something that should always be done after updating. By unhooking your ethernet cable you will retain your waypoints on your console unit. The hard reset wipes out your waypoint...

Pepsi man

I SHOULD BE FISHIN wrote: ↑Wed Oct 20, 2021 11:02 am The only piece that might come into play that I have is a riser for the bow, new price is $175. If you need it I can sell it to you for like $100. Just let me know....

I know I've been lagging a bit but do you still have that riser? And is it a dual riser?

Pepsi man

Looking to buy a dual bow mount for my 721 pro xp. Also looking for the new active target if any are for sale out there..

Pepsi man

There are several potential causes for this problem. 1st and most likely is not having all units on the same and current software version. Networked units need to be on the same software version. They have a hard time sharing information like map cards and transducers when the software doesn't matc...

Pepsi man

There are several potential causes for this problem. 1st and most likely is not having all units on the same and current software version. Networked units need to be on the same software version. They have a hard time sharing information like map cards and transducers when the software doesn't matc...

Pepsi man

I just installed an HDS carbon 16 on the console (previously Live 9) and now when I power on both the Live at the bow along with the Carbon at the console the Live unit stays stuck on the HDS Live screen. The carbon works fine with both turned on. They are linked with an ethernet cable. If I only tu...

Pepsi man

I'm replacing an HDS live 9 with an HDS carbon 16. I need to find out which 9 to 7 pin adapter i need for the thru hull ducer. I'm not sure what brand or model the thru hull ducer is on my boat. Its a 2021 phoenix 721 pro xp. There are 2 adapters available, one for non chirp with analog temp and the...

Pepsi man

Looking for a console mount for an HDS carbon 16. I have a phoenix 721 pro xp with the lower gauges. I'll buy the complete mount or just gimbal like from BBT. Let me know what you want to get rid of before I have to buy new.

Pepsi man

I also fish the Federation and will dabble in pro am and team events. I started off with an older Z19, then to a 20 foot skeeter, then the controversial ranger rt178 and now a phoenix 721 pro xp. First off, storage for your boat should be considered. Now the most versatile would be the 520. Its only...

Pepsi man

The only piece that might come into play that I have is a riser for the bow, new price is $175. If you need it I can sell it to you for like $100. Just let me know.... Thanks bit I'm just gonna bite the bullet and order the mega mount for the console and dual mount for the bow from BBT. I can't see...

Pepsi man

Since you asked if the wires were the same I thought you were referring to the power wires. Yes, the transducer plug is different and will either require the adapter, or a new 7 pin connector transducer. No worries bud. I eventually found the information I needed and thought ahead to order any adap...

Pepsi man

In case you didnt see my other post. Carbon is 7 pin for the 2 d. Live was 9 pin for the 2d sonar port. All units before live were 7 pin plugs on the 2 d sonar port. If you had the 2 d 9 pin with the live you will need an adapter. If you were you using the A1 3 in 1 then you you are good to go. The...

Pepsi man

I just installed 2 carbons at the bow of my boat and although the HDS16 CARBONS come with heavier gimbal Brackets they do shake a little in rough water. When it was just the single on a riser it was rock solid. I have some of the BBT stuff sitting in my garage for a bow mount if you are interested ...

Pepsi man

I'm getting a HDS carbon 16 in the mail. Will a BBT apache (heavy duty) gimbal be sturdy enough for the carbon 16 at the console or will the BBT shelf shroud mount be absolutely necessary. My boat is a 721 pro xp with the shelf shroud and gauges on the bottom. I fish mainly the ca delta and the surr...

Pepsi man

rod bender wrote:looking for a Lowrance carbon 12 or 16!call or text (310)678-9495

Not sure if you're still lookin but a member here pointed me towards bassfishinelectronics.com just bought a brand new carbon 16 for 2299.99.

Pepsi man

Marc wrote:Same cables. You are good.

Thanks. I appreciate it.

Pepsi man

kb wrote:New in the box Lowrance Active Image Live Target. text (916) 390-7770 for price and if still available. Paypal available would prefer pick up near Sacramento but can ship if you pay shipping.

Still available?

Pepsi man

Thanks a bunch! Have you ordered from them are they legit? Never heard of them but site looks legit..I ordered one on my credit card just in case..for piece of mind, can anyone vouch for them?.. Thanks again Nysrx..I was about to order one for 2900 on ebay too. https://m.facebook.com/BassFishinElec...

Pepsi man

What Alan said..sometimes it feels like I'm about to rip that dang cord off trying to get it to pop. I do find it easier when I lean forward and pull straight up rather than at an angle towards me..once its popped the head turns and the gas struts take over for a smooth landing.

Pepsi man

There is some good information here..I get the same fault/code only when load my boat at the ramp..maybe it is because I turn off the power to my trolling motor so I don't get shredded hooking to the winch..I'll also have to check to make sure I'm up to date on software.

Pepsi man

I got my hands on a new carbon 16 that is coming in the mail. I have a single HDS Live 9 at the console that I will move to the bow and use for ActiveTarget. Will the existing wires for the Live work for the Carbon? I know the pins have changed from some models but not sure if it is from Carbon to L...

Pepsi man

Here is there website. https://www.bassfishinelectronics.com/search?q=16+carbon Thanks a bunch! Have you ordered from them are they legit? Never heard of them but site looks legit..I ordered one on my credit card just in case..for piece of mind, can anyone vouch for them?.. Thanks again Nysrx..I wa...

Pepsi man

Nysrx wrote:Here is there website. https://www.bassfishinelectronics.com/s ... =16+carbon

Thanks a bunch! Have you ordered from them are they legit?

Pepsi man

jerrysfishing wrote:Three like new, maybe never used
6.3:1
$120 each
1-916-689-4705

Are u willing to meet in Lodi?

Pepsi man

Looking for a hds carbon 16 head unit only. Text me 209 986 5383

Pepsi man

Russell Marine Products wrote:More arrived today!! Back in stock and ready to ship!!!

Yikes I missed the bus! Now out of stock, are you getting anymore? I need one for sure.

Pepsi man

In the Fury Series I'd say a 733C or a 734C. I made the Champ 734C many years ago as my personal Super Spook rod. I made it a tad slower to be "perfect". The Fury Series 734C is just a bit faster than the Champ 734C so many guys drop down to the FR 733C for walking baits. THX!!!! I use a ...

Pepsi man

A while ago I purchased an 88 tracker from someone on Facebook mkt place. I should have had a mechanic take a look at it beforehand but I felt like I could trust the guy (my mistake, a valuable lesson). I went in knowing there were issues but not to the actual extent. Anyways I had a mobile mechani...

Pepsi man

I just purchased a Ghost trolling motor that I will be mounting on my Pro175 tournament edition. This is all new technology to me so I'm curious as to what fish finder to buy. Ill probably never have the money for live scan and I'm not looking to spend a ton. I'm thinking maybe the Elite F7? So any...

Pepsi man

I had a ranger, 2001. Started looking for a new/newer boat. Went down to C and C and checked out the rangers, phoenix, and vexus. Didnt like the phoenix layout, plastic trim pieces or switch panel. Didnt care for the ranger, too many small vinyl, and plastic pieces also. Never looked at Nitro. I en...

Pepsi man

Which is why you shouldn't buy a new boat, unless it's a business. Buy used, get assessed at low price or low bill of sale to establish low value and then re-power. Good luck! Excuse my ignorance, but I just bought a new bass boat. How will they bill you, is there something you have to report after...

Pepsi man

Which is why you shouldn't buy a new boat, unless it's a business. Buy used, get assessed at low price or low bill of sale to establish low value and then re-power. Good luck! Excuse my ignorance, but I just bought a new bass boat. How will they bill you, is there something you have to report after...

Pepsi man

2nd Basshole wrote:I think June through August, but hope someone connected provides better details.

I wanna say first week of May. Call Richard at cc marine and ask him.

Pepsi man

I had a ranger, 2001. Started looking for a new/newer boat. Went down to C and C and checked out the rangers, phoenix, and vexus. Didnt like the phoenix layout, plastic trim pieces or switch panel. Didnt care for the ranger, too many small vinyl, and plastic pieces also. Never looked at Nitro. I en...

Pepsi man

I don't see what the fuss is about. I have made it a habit of wearing my PFD with the safety lanyard since owning my first console boat. Going 70+ things can happen fast, which is why just about any tournament worth anything has this in the rules. I can see how some people can see it as letting a fo...

Pepsi man

Thanks for the help guys! I put together a rig based on Tactical Bassin tutorial and used it today and got absolutely no bites at all. I did use too heavy a jig head on my three hooked baits and will be lightening them up. But I can't say there was any other problem with the set up as no matter wha...

Pepsi man

19'-0 is not a very deep garage. Corner to corner = 26'-10 Boat on trailer is 8'-0 wide ( half = 4'-0 ) With tongue folded length needs to be less than 23'-0 Highly doubt your going to fit a 21' boat Just incase anyone else is in the same situation...it fits with inches on either side. Just use 2 w...

Pepsi man

MichaelB wrote:Congrats on the new boat !!

Thanks!!! Picking up the boat tomorrow morning and will give an update. I really really hope it fits so I can load with tackle and rods night before tournament morning, but if it doesn't so be it. Hope this will help someone in same the same situation.

Pepsi man

tsmith4 wrote:Brand New Lowrance HDS LIVE 12s New In Box
No transducer included
$2400
Txt or PM with questions
5o9 96o 1319

2FEC7952-5438-49D5-8374-250D8683D6CD.jpeg

43043AFA-DE0A-4F4E-886D-C92B1A1555CB.jpeg

Still available?

Pepsi man

WRB wrote:You need to know over all length including trailer and engine down + prop. Phoenix 721 is 20’11” boat with jack plate, engine or trailer. Look up how to calculate triangle.
Remember the19’6” length is door closed.
Tom

Thanks for the help Tom! Problem solved for now. In 6 months I'll he golden.

Pepsi man

19'-0 is not a very deep garage. Corner to corner = 26'-10 Boat on trailer is 8'-0 wide ( half = 4'-0 ) With tongue folded length needs to be less than 23'-0 Highly doubt your going to fit a 21' boat Thanks for the insight! I'll be moving into new property in about 6 months and we will have a 35x40...

Pepsi man

I just recently sold my old boat and my dealer has a 2021 phoenix 721 pro xp available from a order bailout. I've looked at a few and took measurements and...it looks like it will fit but need to be certain. I have a 19x19 garage with a 16ft door. Boat has manual jack plate and mercury pro xs. For t...

Pepsi man

Iceman.carney wrote:2019 Ranger 519
Bought in May new I have pink slip
Warranty till May 2024
92 hours on motor
2ea. 12"Lowrance HDS LIVE with Ultrex w/i-pilot 36 volt
boat and motor covers
$52,200.00
Iceman.carney@icloud.com Cell 650-302-4661

Contacting you now. Keep em comin.

Pepsi man

Just sold my boat and looking to upgrade. Looking for 1 or 2 year old boats in mint condition in the 20 ft class. Open to 19 ft. Money is good so let me know what you got or I will end up ordering brand new. Thanks. ***Thanks for all the offers! I just bought a new 721 pro xp so in a few years I'll ...

Pepsi man

Do you have more inventory available? I checked on your website and I couldn't find any. I'm in the market now but selling my boat first. Also, do you guys take trade ins? Thanks. Hi there, we would be happy to help you. Give us a call at 925-443-5775. Thanks! Just sold my boat today. Definitely lo...

Pepsi man

Last Chance Performance Marine wrote:Tournament Ready!!!

Still available?

Pepsi man

Do you have more inventory available? I checked on your website and I couldn't find any. I'm in the market now but selling my boat first. Also, do you guys take trade ins? Thanks.

Pepsi man

Looking to sell my 2018 Ranger RT178. This boat is amazing for family fun fishing and local tournaments. It has been very good to me but I am blessed with the opportunity to buy a bigger boat. PM me with questions and offers. Boat is garage stored and is in very good condition. Motor is still under...

Pepsi man

Where are you located and what is the shortest storage length?

Pepsi man

Looking to sell my 2018 Ranger RT178. This boat is amazing for family fun fishing and local tournaments. It has been very good to me but I am blessed with the opportunity to buy a bigger boat. PM me with questions and offers. Boat is garage stored and is in very good condition. Motor is still under...

Search found 56 matches

Tags

Notice